Installation

The FZ-1 one was designed to make installation simple and quick. The FZ-1 uses screw terminals for all its connections so that it requires no crimping. The installation is as simple as 1-2-3.

You can download the installation document in PDF format.

You can download the FZW-1 wiring harness installation document in PDF format.

1. Connect battery power, ground and a switched source to the FZ-1 input terminal.
2. Connect your device's power and ground wires to the FZ-1 +12V output bus and ground bus terminals respectively.
3. Insert a fuse in the constant or switched power position for the output connected to your device.

You're done. That's it. Okay, so maybe I condensed the installation a little but you get the idea.

Image Achive

See installations from other customers in the image archive.

Online Articles

Here are some online references to other fuzeblock installs.
(Some sites may require registration) 

• FuzeBlock Install on a R12GS (Burnzilla, advrider.com)
• Fuzeblock Install on a 2006 R1200GS (great wiring job)
• Fuzeblock Install on a Toyota ForeRunner by Ludedude